Fall PEAR-Fection

Updated: Sep 14

Good Morning Digi Divas everywhere!

As always- thank you for stopping in. Today I would like to share with you my NEW for September stamp set Fall PEAR-fection Digital Stamp Set #3330J. Growing up in Missouri we had a neighbor that grew fruit trees. Butch grew apples, pears, and plums. Half the neighborhood had pies and jams from those few trees. Some years the branches were so heavy with fruit we would have to cut the branches to keep them from splitting. I thought of this and decided to draw some branches in an antique piece of pottery to share with you. Join me as I make two (2) simple cards using my Fall PEAR-fection Digi Set! Hope you will be "fruitfully" inspired....





MATERIALS LIST:

Fall Pear-fection #3330J stamp set COPIC® MARKERS:

Barn Red Cardstock 5"x7" E04, E07, E08, E09

American Crafts® New Day Burlap covered Cardstock E40, E41, E42, E43

White Hammermill® 100lb. Coverstock Y00, Y02

Foam Double sided Tape YR20, YR21, YR23, YR24

1/8" hole punch YG01, YG61, YG63, YG67

Spellbinders® - A2 Devine Eloquence Card Creator Die Set E55, E57, E59

1/8" Yellow ribbon - 10" T1, T3

1/8" Olive Ribbon - 10"

1/4" Rust Color ribbon - 6"

3 Reddish Pearls

Dimensional Glue®

1/8" Tear-ific Tape®

Ex-acto® Knife


To start our card for today, I sized the main image to 3"x5" about 1-1/2" from the top and the side of a landscape 8-1/2"x11" layout. I then stacked the (2) smaller pears and sized to 3/4" and placed to the right of the clay pottery. Select a sentiment and size to desired size and place about 1" from the bottom. Since I am also planning a second card I copied the two (2) smaller pears and pasted on the right half of the lay out and sized to 3"x2-1/2". Copied the top pear and pasted it about 1/2" from the top. Selected a sentiment and placed just under the two pear image. Printed on white Hammermill® 100lb Coverstock.


You can color as desired. I colored my images with Copic® Markers. A list of the colors I used are above. After coloring I cut the 8-1/2"x11" paper in half and laid the three pears to the side.


I then took the Largest of the Spellbinder's - A2 Devine Eloquence® Card Creator Die Set centered it around the pear image with the clay pottery, marked the places the the image extended beyond the inside opening with a lead pencil. Using an Ex-acto® knife to cut around those portions of the image in order to place on back side of the die to avoid cutting the image. Run through the Big shot. Using the long slender die center the sentiment and run through the Big Shot.


Cut the barn red cardstock to 5"x7", Cut the American Crafts® New Day Burlap covered cardstock to 4-3/4" x 6-3/4". Using Dimensional Glue® on the back side of the die cut image, center on the burlap about 1/2" from the top and both sides. Using Tear-ific® Tape I adhered the Rust ribbon across the bottom of the Burlap peace, again I did the same to the Yellow and the Olive Ribbons.


I cut the left end of the sentiment die cut off. Using the hole punch I punched two (2) holes and run the excess ribbon through and tied into a bow. Using Dimensional glue center under the main image.



Using foam double sided tape on the back side of the burlap center and adhere to the barn red cardstock to 5"x7". Using Tear-ific® Tape adhere the card front to a 5"x7" card base with the fold on the left side. As a final touch, using dimensional glue adhere three (3) reddish pearls to the upper right corner of the card. (If you can not find reddish pearls you can use Copic® ink #E08 to color 3 white pearls.)


Entered in the following challenge:

http://challengeupyourlife.blogspot.com/


I hope you enjoyed the first card with

Fall PEAR-fection #3330J... Are you ready to craft another card?






MATERIAL LIST:

Fall Pear-fection #3330J stamp set COPIC® MARKERS:

White Hammermill® 100lb. Coverstock Y00, Y02

Graphics 45 ® Fruit harvest Cardstock YR20, YR21, YR23, YR24

Core-dinations® Fern Cardstock YG00

VersaMagic® - Spanish Olive ink pad E55, E57, E59

Foam Double Sided Tape T1, T3

Fancy Frame Die Set

Dimensional Glue®

1/4" Harvest Gold Color ribbon - 8"


For the second card I stacked the two (2) smaller pears and pasted on the right half of the lay out and sized to 3"x2-1/2". Copied the top pear and pasted it about 1/2" from the top. Selected a sentiment and placed just under the two pear image. Printed on white Hammermill® 100lb Coverstock.


You then color as desired. I colored my images with Copic® Markers. A list of the colors I used are above.


Cut a 5"x7" Core-dinations® Fern Cardstock, using Tear-ific® Tape adhere to a 5"x7" card base. Cut a second piece 3-7/8"x5" and set to the side. Cut a 4-3/4"x6-3/4" Graphics 45 ® Fruit Harvest Cardstock, adhere the 1/4" Harvest Gold Color ribbon across the bottom portion of the cardstock about 1/2" above the bottom. Tie a half knot with the excess ribbon and adhere with dimensional glue to the left on the taped ribbon (as shown).


Center the Fancy Frame Die over the Pear image and run through the Big Shot. Using VersaMagic® - Spanish Olive ink pad feather edge the image. Using dimensional glue adhere the rectangular frame die cut and center on the 3-7/8"x5" Core-dinations® Fern Cardstock.



Fussy cut the third pear, apply dimensional glue on the back side along the stem. Let Dry. Adhere Foam tape to the backside of the fussy cut pear and line up with the front pear on the main image and adhere. Apply foam tape to the back side of the main image and align in the 3-7/8"x5" in the die cut and adhere. (As shown)


Using Tear-ific® Tape on the backside of the T3-7/8"x5" Core-dinations® Fern Cardstock and adhere at an angle on the cardbase just above the Harvest Gold ribbon. Congratulations, that's our second card for today.


Thank you for coming along today for two (2) simple and fast cards for the day. Hope you enjoyed it and inspired to visit my shop at: https://www.janmahew.com


HAPPY CRAFTING DIVAS EVERYWHERE!

Hugs,




(Owner & Illustrator of Jan's Digi Stamp shop)


TSF Badge with Border.jpg
TSF-Badges-2021.jpg
IMG_3471.JPG
IMG_3470.JPG

©Jan Mahew 2020