Jan Mahew
- Sep 10, 2019
- 3 min read

OVER THE RIVER AND THROUGH THE WOODS - 3070J Digi Set

Updated: Feb 22, 2020

Today I thought I would invite you to take a journey "Over the River and Through the Woods". It is one of my NEW stamp sets for the Holidays! A wonderful way to start your holiday card stash.

OVER THE RIVER - Materials List:

3070J Over the River Digi Stamp Set Nuvo Glitter Drops- Golden Sunset

723 Tree Scene Digi Stamp Set Nuvo Glitter Drops- White Blizzard

744 Sleigh Ride Digi Stamp Set Liquid Pearls - Rouge

Hammermill Premium 100lb. White Cover Stock Puffy 3D Paint

Cardstock Warehouse 12x12 White Cover Versa Magic Aegean Blue Chalk Ink

Recollections Solid Core Blue card stock 1/4" Tear-iffic Tape

TCP Studio - Winter Blues Glitter Stock 3M Foam Tape

Recollections Signature Especial White Glitter Stock Dimensional Glue

Paws-itively Stitched Curvy Caved Rectangle Die Set Royal Glitter Brush

Inverted Corners Rectangle Die Set Small Paint Brush

Elizabeth Dies - #757 and B635 Snow Flake Dies (5) Coffee Filter

3 Rhinestones (Optional)

COPIC Markers:

B000, B60, B63, B66

E07, E31, E37

G03, G05, G14, G17, G19, G20, G21, G24

N1, N2, N3, N6

R14, R20, R29

RV10, RV11

YR21, YR23, YR24

Suggested Card Size is 5-3/4x5-3/4 inches.

Using the trees from #723 Tree Scene Digi Stamp Set and #744 Sleigh Ride Digi Stamp Set; arrange and vary sizes of the trees to create a background of snow and trees. you will need about a 5x5 inch area to use. I used the B&W outlines to color so that the snow and trees are not so bold in color. Use 3070J Over the River" Digi Set; I sized the car image to 2-3/8"x3" and positioned in between the trees and towards the bottom. As Shown

Copy and paste a 2nd car in the upper right corner to fussy cut. and select your sentiments. I printed a couple. I used the sentiment that was about 1-1/2"x1".

Print on Hammermill 100lb. Premium White Card Stock.

Color your images. I used Copic Markers. The background is very light colors. I used B60, B63 and B66 for the snow. I used B000 for the sky. Use G14, G17, G19 for the evergreen trees.

Use the Next to largest Paws-itively Stitched Curvy Coved Rectangle Nesting Die to cut out the scene as shown.

Use the Largest Paws-itively Stitched Curvy Coved Rectangle Nesting Die to cut out the Recollections Blue Solid Core Card Stock.

Cut a 5-3/4" x 5-3/4" square of TPC Studio Winter Blues Snowstorm Pearlized Glitter card stock.

Edge the scene cut out with Versa Magic Aegean Blue Chalk Ink.

Fussy cut the 2nd car image.

Apply Puffy 3D Paint to the snow areas on the car. Apply Dimensional Glue to the headlights. Let Dry.

Apply 1/4" Tear-ific Tape to the back side of the TPC Studio-Winter Blue, Recollections Solid Core Blue and the die cut image.

See photo

Adhere the Die cut image centered in the Recollections Solid core Blue. Adhere the

Die cuts to the center of the Square TPC Studio-Winter Blue.

Edge the Square TPC Studio-Winter Blue with Versa Magic-Aegean Blue Chalk Ink.

As Shown

Cut your Sentiment of choice- I chose the Inverted Corners Rectangle. Run through Big Shot.

Edge the sentiment cut out with Versa Magic-Aegean Blue Chalk Ink.

Apply Nuvo Glitter Drops-White Blizzard to the snow areas on the card front. Use a small paint brush to spread on the land areas. (As Shown) Let Dry.

Cut (5) five Snowflakes using Elizabeth Dies #757 and B635 Snowflake Dies. Cut of Recollections Signature Especial White Glitter Stock.

Apply (3) three snowflakes to the upper left corner of the card front and (2) two snowflakes in the lower right corner (as shown). Adhere to card front with Dimensional Glue.

Apply 3M Foam Tape to the back of the Fussy Cut Car and adhere over the car image on the scene.